Polyimide film F46 Adhesive Tape 6254
I.Scope of Application: This product is made From Polyimide film be
produced by adopting "Biaxial Tension Process" painted with F46
adhesive on single surface or double surfaces and cut after drying,
this tape applies to insulation material
for electrical wire winding, which is molded through melting at the
temperature of 350 -380°C for half an hour
Specification: 2
1. Appearance: the adhesive tape is clean and smooth, without air
bubble and impurities
2. Size
1). Length: the length of a reel of adhesive tape is not less than
300m, the number of section is not more than 4 sections, minimum
length of them is not less than 10m
2). Width: the width and its allowance of the adhesive tape is
10±0.5 mm, 15±0.5mm, 20±1 mm, 25±1 mm.
3). Thickness: nominal thickness and allowance of the adhesive
tape: we can supply tapes
with 0.033mm thickness(allowance of the adhesive with double
surfaces) according to requirement of customers, their Allowable
Deviations is from 0.031mm-0.038mm or supply according to the
requirement of customer.
3.Specification
Ⅱ. Packing, Mark, Preservation and Transportation
1.The film should be provided in rolls and wound up to the pipe
core, each roll is well packed and loaded with plastic bag to be
placed into dry and clean box.
2.The each box packing should be marked with the type, product
specification, size, lot number, gross weight, net weight, date of
manufacture, name of the manufacturer and the product acceptances
certificate is attached. At the same time the painting words of
Damp-proof collision-proof etc.
3.The should be pressured in dry and clean room, the preservation
period from the date of production is two years and can still be
used when it is qualified in case of the preservation period is
exceeded and checked according to standard./
4.During the preservation and transportation, damping and
mechanical damage should be avoided.
| |
| |
| Advantages | The polyimide film is produced by adopting "Biaxial Tension
Process" , its all performance indexes are better than polyimide
film produced by "Aluminum Foil Process" "Doctor-balding Process". | | Export Markets | Southeast and midst of AsianEurope | | Payment Details | T/T in advance or L/C at sight | | Min Order | 200kg | | Ship Date | In 14days after receive payment or L/c |
| |
|
